EasyFire Pellet Stoves

NEW Pellet Stove Installation in RI!
Service, Cleaning, Repairs & Parts.
Call us Today 401-352-0010

In-Home Service & Repair all makes and models. (Rhode Island)

EasyFire Pellet Stove Installation Repair Cleaning Rhode Island™

EF5001U EasyFire Pellet Stove Installation Repair Cleaning Rhode Island

EF5001U

EF5001G EasyFire Pellet Stove Installation Repair Cleaning Rhode Island

EF5001G

EF4001N-INSERT

EF4001N-INSERT

EF3801G-STOVE

EF3801G-STOVE

Digital Pellet Technology & Energy Efficiency

EasyFire pellet heaters combine state of the art technology with a renewable, environment friendly fuel source. Pellets formed of recycled wood are fed into the heater and burned, offering the warmth and ambiance of a wood burning stove. The digital control system constantly monitors the EasyFire’s performance providing even heat with minimum fuel and electric power consumption. These features are combined exclusively by the EasyFire Pellet Heater.

EasyFire™ AutoLite

EasyFire has engineered the total solution by combining DC Drive Technology with Autolite Ease. With the optional AutoLite system, your stove will start and stop based on wall or remote thermostat settings. The AutoLite system utilizing standard AC power and an industrial style element will start the pellets burning in the burn pot then switch operation to the digital control system. This allows for battery back up operation of the stove if the house AC power fails. If the power fails and the stove is not in operation, it is a simple matter of hand lighting the stove and running for days on DC battery power (12V DC battery must be connected).

DC Drive – Battery Backup Capable

An exclusive EasyFire feature is the DC electric operating system which allows battery back up protection. With the optional 12V battery connected and AC house power goes off your EasyFire heater will continue to heat for days*. When AC power is restored the EasyFire heater will automatically recharge the battery. (* Based on battery type used)

Design Engineered Advantages

Additional design features include a feed disk system designed to prevent clogging, pellet surges, and an easy to maintain heat exchange system which reduces cleaning time. The EF4001 insert is designed for installation in today’s small factory built fireplaces.

Operation Ease

A simplified control system allows you to set a temperature range for hours of comfortable steady heat without the fuss of adjusting levers or continuously feeding the fire. With the 12V DC battery connected you never need to worry about power failures and losing heat. Your EasyFire Heater will automatically switch to battery power in the event of an electrical power outage and will charge the battery with the power returns. Our Autolite system adds to the standard features by automatically starting the stove based on thermostat setting. You can even add a remote control thermostat and place it were you are most comfortable. Ease of operation, simple maintenance, low fuel cost make the EasyFire the energy and environment friendly heater for the new millennium.

Dimensions

Dimensions inside fireplace cavity 18:87″ high x 20″ wide x 10.12″ inside cavity
Minimum Fireplace opening required 19″ high x 21″ wide x 13″ deep
Size of Shroud (surround) to cover fireplace opening 40″ wide height adjusts from 25-32″
Hopper Capacity Adjusts from 38 to 54 pounds pellet fuel
Weight 125 lbs
Exhaust Vent 3″ diameter
Combustion Air Vent 2″ diameter

 

Specifications

Model 3801B 4001B 5001B 5001U-B
Feed Rate Max. 4.43 lbs 4.43 lbs 5.36 lbs 5.36 lbs
Feed Rate Min. 1.0 lbs 1.0 lbs 1.3 lbs 1.3 lbs
Hopper Size 50 lbs 36-50 lbs 62 lbs 128 lbs
Max. Burn Rate BTU 38,600 38,600 46,700 46,700
Combustion Efficiency 94% 94% 94% 94%
Heat Exchange Efficiency 78.5%(High) 78.5%(High) 78.5%(High) 78.5%(High)
Heating Capacity 1000-1600* 1000-1600* 1200-2000* 1200-2000*
Power Consumption 12V DC 2.25 amps 2.25 amps 2.25 amps 2.25 amps
Power Consumption – 120V AC
Ignitor – 120V AC
27 watts
230 watts
27 watts
230 watts
27 watts
230 watts
27 watts
230 watts
Energy Cost per Month Fan and Feed System $1.90 $1.90 $1.90 $1.90

* Actual heat output and space heated is determined by: climate, home construction, and type of pellet. Check with your dealer for further information.